.. _getting_started_installation_source-link:
-Source code is hosted on Launchpad_. In order to get the sources, you will need Bazaar_ to pull the source from Launchpad. Bazaar is a version control system that helps you track project history over time and collaborate efficiently. You may have to create an account on Launchpad to be able to collaborate on OpenERP development. Please refer to the Launchpad and Bazaar documentation to install and setup your development environment.
-
-The running example of this section is based on an Ubuntu environment. You may have to adapt the steps according to your system. Once your working environment is ready, prepare a working directory that will contain the sources. For a ``source`` base directory, type::
+Source code is hosted on Launchpad_. In order to get the sources, you
+will need Bazaar_ to pull the source from Launchpad. Bazaar is a
+version control system that helps you track project history over time
+and collaborate efficiently. You may have to create an account on
+Launchpad to be able to collaborate on OpenERP development. Please
+refer to the Launchpad and Bazaar documentation to install and setup
+your development environment.
+
+The running example of this section is based on an Ubuntu
+environment. You may have to adapt the steps according to your
+system. Once your working environment is ready, prepare a working
+directory that will contain the sources. For a ``source`` base
+directory, type::
mkdir source;cd source
-OpenERP provides a setup script that automatizes the tasks of creating a shared repository and getting the source code. Get the setup script of OpenERP by typing::
+OpenERP provides a setup script that automatizes the tasks of creating
+a shared repository and getting the source code. Get the setup script
+of OpenERP by typing::
bzr cat -d lp:~openerp-dev/openerp-tools/trunk setup.sh | sh
make help
-Next step is to initialize the shared repository and download the sources. Get the current trunk version of OpenERP by typing::
+Next step is to initialize the shared repository and download the
+sources. Get the current trunk version of OpenERP by typing::
make init-trunk
-This will create the following structure inside your ``source`` directory, and fetch the latest source code from ``trunk``::
+This will create the following structure inside your ``source``
+directory, and fetch the latest source code from ``trunk``::
drwxrwxr-x 3 openerp openerp 4096 2012-04-17 11:10 addons
drwxrwxr-x 3 openerp openerp 4096 2012-04-17 11:10 misc
drwxrwxr-x 3 openerp openerp 4096 2012-04-17 11:10 server
drwxrwxr-x 3 openerp openerp 4096 2012-04-17 11:10 web
-Some dependencies are necessary to use OpenERP. Depending on your environment, you might have to install the following packages::
+Some dependencies are necessary to use OpenERP. Depending on your
+environment, you might have to install the following packages::
- sudo apt-get install graphviz ghostscript postgresql-client
-
- sudo apt-get install python-dateutil python-feedparser python-gdata
- python-ldap python-libxslt1 python-lxml python-mako, python-openid
- python-psycopg2 python-pybabel python-pychart python-pydot
- python-pyparsing python-reportlab python-simplejson python-tz
- python-vatnumber python-vobject python-webdav python-werkzeug python-xlwt
- python-yaml python-imaging python-matplotlib
+ sudo apt-get install graphviz ghostscript postgresql-client \
+ python-dateutil python-feedparser python-gdata \
+ python-ldap python-libxslt1 python-lxml python-mako \
+ python-openid python-psycopg2 python-pybabel python-pychart \
+ python-pydot python-pyparsing python-reportlab python-simplejson \
+ python-tz python-vatnumber python-vobject python-webdav \
+ python-werkzeug python-xlwt python-yaml python-imaging \
+ python-matplotlib
Next step is to initialize the database. This will create a new openerp role::
make server
-Testing your installation can be done on http://localhost:8069/ . You should see the OpenERP main login page.
+Testing your installation can be done on http://localhost:8069/. You
+should see the OpenERP main login page.
.. _Launchpad: https://launchpad.net/
.. _Bazaar: http://bazaar.canonical.com/en/
Command line options
====================
+.. program:: openerp-server
+
Using the command ::
./openerp-server --help
-gives you the available command line options. For OpenERP server at revision 4133, an output example is given in the `Command line options example`_. Here are a few interesting command line options.
-
General Options
+++++++++++++++
--logfile=LOGFILE file where the server log will be stored
-n INTERFACE, --interface=INTERFACE specify the TCP IP address
-p PORT, --port=PORT specify the TCP port
- --net_interface=NETINTERFACE specify the TCP IP address for netrpc
- --net_port=NETPORT specify the TCP port for netrpc
- --no-netrpc disable netrpc
--no-xmlrpc disable xmlrpc
-i INIT, --init=INIT init a module (use "all" for all modules)
--without-demo=WITHOUT_DEMO load demo data for a module (use "all" for all modules)
Internationalization options
++++++++++++++++++++++++++++
-Use these options to translate OpenERP to another language.See i18n section of the user manual. Option '-l' is mandatory.::
+Use these options to translate OpenERP to another language.See i18n
+section of the user manual. Option '-l' is mandatory.::
-l LANGUAGE, --language=LANGUAGE
specify the language of the translation file. Use it
Options from previous versions
++++++++++++++++++++++++++++++
-Some options were removed in OpenERP version 6. For example, ``price_accuracy`` is now
-configured through the :ref:`decimal_accuracy` screen.
+Some options were removed in OpenERP version 6. For example,
+``price_accuracy`` is now configured through the
+:ref:`decimal_accuracy` screen.
Configuration
==============
* one for the client: ``~/.openerprc``
* one for the server: ``~/.openerp_serverrc``
-If they are not found, the server and the client will start with a default configuration. Those files follow the convention used by python's ConfigParser module. Please note that lines beginning with "#" or ";" are comments. The client configuration file is automatically generated upon the first start. The sezrver configuration file can automatically be created using the command ::
+If they are not found, the server and the client will start with a
+default configuration. Those files follow the convention used by
+python's ConfigParser module. Please note that lines beginning with
+"#" or ";" are comments. The client configuration file is
+automatically generated upon the first start. The sezrver
+configuration file can automatically be created using the command ::
./openerp-server -s or ./openerp-server --save
-c CONFIG, --config=CONFIG specify alternate config file
+Configure addons locations
+++++++++++++++++++++++++++
+
+By default, the only directory of addons known by the server is
+server/bin/addons. It is possible to add new addons by
+
+ - copying them in server/bin/addons, or creating a symbolic link to
+ each of them in this directory, or
+ - specifying another directory containing addons to the server. The
+ later can be accomplished either by running the server with the
+ ``--addons-path=`` option, or by configuring this option in the
+ openerp_serverrc file, automatically generated under Linux in your
+ home directory by the server when executed with the ``--save``
+ option. You can provide several addons to the ``addons_path`` =
+ option, separating them using commas.
+
Start-up script
===============
.. versionadded:: 6.1
To run the OpenERP server, the conventional approach is to use the
-`openerp-server` script. It loads the :ref:`openerp library`, sets a few
-configuration variables corresponding to command-line arguments, and starts to
-listen to incoming connections from clients.
+`openerp-server` script. It loads the :ref:`openerp library`, sets a
+few configuration variables corresponding to command-line arguments,
+and starts to listen to incoming connections from clients.
Depending on your deployment needs, you can write such a start-up script very
easily. We also recommend you take a look at an alternative tool called
into one of the WSGI entry points of the server.
-Appendix
-========
-
-Command line options example
-++++++++++++++++++++++++++++
-
-Usage: openerp-server [options]
-
-**Options**::
-
- --version show program's version number and exit
- -h, --help show this help message and exit
-
-**Common options**::
-
- -c CONFIG, --config=CONFIG
- specify alternate config file
- -s, --save save configuration to ~/.openerp_serverrc
- -i INIT, --init=INIT
- install one or more modules (comma-separated list, use
- "all" for all modules), requires -d
- -u UPDATE, --update=UPDATE
- update one or more modules (comma-separated list, use
- "all" for all modules). Requires -d.
- --without-demo=WITHOUT_DEMO
- disable loading demo data for modules to be installed
- (comma-separated, use "all" for all modules). Requires
- -d and -i. Default is none
- -P IMPORT_PARTIAL, --import-partial=IMPORT_PARTIAL
- Use this for big data importation, if it crashes you
- will be able to continue at the current state. Provide
- a filename to store intermediate importation states.
- --pidfile=PIDFILE file where the server pid will be stored
- --addons-path=ADDONS_PATH
- specify additional addons paths (separated by commas).
- --load=SERVER_WIDE_MODULES
- Comma-separated list of server-wide modules
- default=web
-
-**XML-RPC Configuration**::
-
- --xmlrpc-interface=XMLRPC_INTERFACE
- Specify the TCP IP address for the XML-RPC protocol.
- The empty string binds to all interfaces.
- --xmlrpc-port=XMLRPC_PORT
- specify the TCP port for the XML-RPC protocol
- --no-xmlrpc disable the XML-RPC protocol
- --proxy-mode Enable correct behavior when behind a reverse proxy
-
-**XML-RPC Secure Configuration**::
-
- --xmlrpcs-interface=XMLRPCS_INTERFACE
- Specify the TCP IP address for the XML-RPC Secure
- protocol. The empty string binds to all interfaces.
- --xmlrpcs-port=XMLRPCS_PORT
- specify the TCP port for the XML-RPC Secure protocol
- --no-xmlrpcs disable the XML-RPC Secure protocol
- --cert-file=SECURE_CERT_FILE
- specify the certificate file for the SSL connection
- --pkey-file=SECURE_PKEY_FILE
- specify the private key file for the SSL connection
-
-**NET-RPC Configuration**::
-
- --netrpc-interface=NETRPC_INTERFACE
- specify the TCP IP address for the NETRPC protocol
- --netrpc-port=NETRPC_PORT
- specify the TCP port for the NETRPC protocol
- --no-netrpc disable the NETRPC protocol
-
-**Web interface Configuration**::
-
- --db-filter=REGEXP Filter listed database
-
-**Static HTTP service**::
-
- --static-http-enable
- enable static HTTP service for serving plain HTML
- files
- --static-http-document-root=STATIC_HTTP_DOCUMENT_ROOT
- specify the directory containing your static HTML
- files (e.g '/var/www/')
- --static-http-url-prefix=STATIC_HTTP_URL_PREFIX
- specify the URL root prefix where you want web
- browsers to access your static HTML files (e.g '/')
-
-**Testing Configuration**::
-
- --test-file=TEST_FILE
- Launch a YML test file.
- --test-report-directory=TEST_REPORT_DIRECTORY
- If set, will save sample of all reports in this
- directory.
- --test-enable Enable YAML and unit tests.
- --test-commit Commit database changes performed by YAML or XML
- tests.
-
-**Logging Configuration**::
-
- --logfile=LOGFILE file where the server log will be stored
- --no-logrotate do not rotate the logfile
- --syslog Send the log to the syslog server
- --log-handler=PREFIX:LEVEL
- setup a handler at LEVEL for a given PREFIX. An empty
- PREFIX indicates the root logger. This option can be
- repeated. Example: "openerp.orm:DEBUG" or
- "werkzeug:CRITICAL" (default: ":INFO")
- --log-request shortcut for --log-
- handler=openerp.netsvc.rpc.request:DEBUG
- --log-response shortcut for --log-
- handler=openerp.netsvc.rpc.response:DEBUG
- --log-web shortcut for --log-
- handler=openerp.addons.web.common.http:DEBUG
- --log-sql shortcut for --log-handler=openerp.sql_db:DEBUG
- --log-level=LOG_LEVEL
- specify the level of the logging. Accepted values:
- ['info', 'debug_rpc', 'warn', 'test', 'critical',
- 'debug_sql', 'error', 'debug', 'debug_rpc_answer',
- 'notset'] (deprecated option).
-
-**SMTP Configuration**::
-
- --email-from=EMAIL_FROM
- specify the SMTP email address for sending email
- --smtp=SMTP_SERVER specify the SMTP server for sending email
- --smtp-port=SMTP_PORT
- specify the SMTP port
- --smtp-ssl specify the SMTP server support SSL or not
- --smtp-user=SMTP_USER
- specify the SMTP username for sending email
- --smtp-password=SMTP_PASSWORD
- specify the SMTP password for sending email
-
-**Database related options**::
-
- -d DB_NAME, --database=DB_NAME
- specify the database name
- -r DB_USER, --db_user=DB_USER
- specify the database user name
- -w DB_PASSWORD, --db_password=DB_PASSWORD
- specify the database password
- --pg_path=PG_PATH specify the pg executable path
- --db_host=DB_HOST specify the database host
- --db_port=DB_PORT specify the database port
- --db_maxconn=DB_MAXCONN
- specify the the maximum number of physical connections
- to posgresql
- --db-template=DB_TEMPLATE
- specify a custom database template to create a new
- database
-
-**Internationalisation options**::
-
- Use these options to translate OpenERP to another language.See i18n
- section of the user manual. Option '-d' is mandatory.Option '-l' is
- mandatory in case of importation
-
- --load-language=LOAD_LANGUAGE
- specifies the languages for the translations you want
- to be loaded
- -l LANGUAGE, --language=LANGUAGE
- specify the language of the translation file. Use it
- with --i18n-export or --i18n-import
- --i18n-export=TRANSLATE_OUT
- export all sentences to be translated to a CSV file, a
- PO file or a TGZ archive and exit
- --i18n-import=TRANSLATE_IN
- import a CSV or a PO file with translations and exit.
- The '-l' option is required.
- --i18n-overwrite overwrites existing translation terms on updating a
- module or importing a CSV or a PO file.
- --modules=TRANSLATE_MODULES
- specify modules to export. Use in combination with
- --i18n-export
-
-**Security-related options**::
-
- --no-database-list disable the ability to return the list of databases
-
-**Advanced options**::
-
- --cache-timeout=CACHE_TIMEOUT
- set the timeout for the cache system
- --debug enable debug mode
- --stop-after-init stop the server after its initialization
- -t TIMEZONE, --timezone=TIMEZONE
- specify reference timezone for the server (e.g.
- Europe/Brussels
- --osv-memory-count-limit=OSV_MEMORY_COUNT_LIMIT
- Force a limit on the maximum number of records kept in
- the virtual osv_memory tables. The default is False,
- which means no count-based limit.
- --osv-memory-age-limit=OSV_MEMORY_AGE_LIMIT
- Force a limit on the maximum age of records kept in
- the virtual osv_memory tables. This is a decimal value
- expressed in hours, and the default is 1 hour.
- --max-cron-threads=MAX_CRON_THREADS
- Maximum number of threads processing concurrently cron
- jobs.
- --virtual-memory-limit=VIRTUAL_MEMORY_LIMIT
- Maximum allowed virtual memory per Gunicorn process.
- When the limit is reached, any memory allocation will
- fail.
- --virtual-memory-reset=VIRTUAL_MEMORY_RESET
- Maximum allowed virtual memory per Gunicorn process.
- When the limit is reached, the worker will be reset
- after the current request.
- --cpu-time-limit=CPU_TIME_LIMIT
- Maximum allowed CPU time per Gunicorn process. When
- the limit is reached, an exception is raised.
- --unaccent Use the unaccent function provided by the database
- when available.
-
-Server configuration file
-+++++++++++++++++++++++++
-
-::
-
- [options]
- addons_path = /home/openerp/workspace/openerp-dev/addons/trunk,/home/openerp/workspace/openerp-dev/web/trunk/addons
- admin_passwd = admin
- cache_timeout = 100000
- cpu_time_limit = 60
- csv_internal_sep = ,
- db_host = False
- db_maxconn = 64
- db_name = False
- db_password = False
- db_port = False
- db_template = template0
- db_user = openerp
- dbfilter = .*
- debug_mode = False
- demo = {}
- email_from = False
- import_partial =
- list_db = True
- log_handler = [':INFO']
- log_level = info
- logfile = False
- login_message = False
- logrotate = True
- max_cron_threads = 4
- netrpc = True
- netrpc_interface =
- netrpc_port = 8070
- osv_memory_age_limit = 1.0
- osv_memory_count_limit = False
- pg_path = None
- pidfile = False
- proxy_mode = False
- reportgz = False
- secure_cert_file = server.cert
- secure_pkey_file = server.pkey
- server_wide_modules = None
- smtp_password = False
- smtp_port = 25
- smtp_server = localhost
- smtp_ssl = False
- smtp_user = False
- static_http_document_root = None
- static_http_enable = False
- static_http_url_prefix = None
- syslog = False
- test_commit = False
- test_enable = False
- test_file = False
- test_report_directory = False
- timezone = False
- translate_modules = ['all']
- unaccent = False
- virtual_memory_limit = 805306368
- virtual_memory_reset = 671088640
- without_demo = False
- xmlrpc = True
- xmlrpc_interface =
- xmlrpc_port = 8069
- xmlrpcs = True
- xmlrpcs_interface =
- xmlrpcs_port = 8071
projects / odoo / odoo.git / blobdiff